Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
147
• Password
Enter the password for the file.
• Password Confirmation
Confirm the new password.
• Status
Shows whether the current settings for the file match the device.
– Valid
The settings are valid.
– Invalid
the settings are invalid.
– '-'
Status cannot be evaluated.
Procedure
1. Enter the password in "Password".
2. To confirm the password, enter the password again in "Password Confirmation".
3. Select the "Enabled" option.
4. Click the "Set Values" button.
4.4.6 Events
4.4.6.1 Configuration
Selecting system events
On the WBM page, you define which system events are reported and how, or execute a
follow-up reaction.
The following messages are always entered in the event log table and cannot be
deselected:
• Changing the admin password
• Starting the device
• Operational status of the device, e.g. whether or not a PLUG is inserted
• Status of errors not yet dealt with
To send these messages to a Syslog server as well, enable the "Syslog" button for the
event "System General Logs".
To Next Page
Loading...
