Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
170 Configuration Manual, 10/2021, C79000-G8976-C475-03
4.4.9.3 SNMPv3 User to Group mapping
Configuration of group members
You assign users to SNMPv3 groups on this WBM page. Each user can only be a member
of one group.
Description
The page contains the following boxes:
• Group Name
Enter the group that will be assigned to the user.
• User Name
Select the user to be a member of the specified group. The drop-down list only
contains users that are not yet assigned to a group.
The table has the following columns:
• Select
Select the row you want to delete.
• Group Name
Displays the SNMPv3 group. A group name can only be changed later if no access
rights have been defined for the group yet.
• User Name
Shows the user that is a member of this group.
To Next Page
Loading...
