Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
185
• End Date
Enter the following values for the end of daylight saving time:
– Hour
Enter the hour.
– Month
Enter the month.
– Week
Enter the week.
You can select the first to fourth or the last week of the month.
– Day
Enter the weekday.
4.4.10.4 SNTP Client
Time-of-day synchronization in the network
SNTP (Simple Network Time Protocol) is used for synchronizing the time in the
network. The appropriate frames are sent by an SNTP server in the network.
Note
To avoid time jumps, make su
re that there is only one time server in the network.
To Next Page
Loading...
