Configuring with Web Based Management
4.7 "Security" menu
SCALANCE SC-600 Web Based Management (WBM)
338 Configuration Manual, 10/2021, C79000-G8976-C475-03
4.7.7.2 Connections
On this WBM page, you configure the basic settings for the OpenVPN connection. You
specify the security settings on the WBM page "Authentication".
Description
• Connection name
Enter a unique name for the OpenVPN connection and click "Create" to create a new
connection.
The table contains the following columns:
• Select
Select the check box in the row to be deleted.
• Name
Shows the name of the OpenVPN connection.
• Operation
Specify how the connection is established.
– start
The device attempts to establish a VPN connection to the partner.
– start on DI
If the event "Digital In" occurs, the device attempts to establish a VPN connection
to the partner.
This is on condition that the event "Digital In" is forwarded to the VPN connection.
To do this in "System > Events> Configuration" activate "VPN Tunnel" for the
"Digital In" event.
– Disabled
The VPN connection is disabled.
To Next Page
Loading...
