Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
Configuration Manual, 10/2021, C79000-G8976-C475-03
165
4.4.9 SNMP
4.4.9.1 General
Configuration of SNMP
On this page, you make the basic settings for SNMP. Enable the check boxes according
to the function you want to use.
Description
The page contains the following boxes:
• SNMP
Select the SNMP protocol from the drop-down list. The following settings are
possible:
– "-" (Disabled)
SNMP is disabled.
– SNMPv1/v2c/v3
SNMPv1/v2c/v3 is supported.
Note
Note that SNMP in versions 1 and 2c does not have any security mechanisms.
– SNMPv3
Only SNMPv3 is supported.
To Next Page
Loading...
