Siemens SIMATIC NET SCALANCE SC632-2C User Manual

Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
152 Configuration Manual, 10/2021, C79000-G8976-C475-03
Description
The table has the following columns:
• Client Type
Select the client type for which you want to make settings:
– Log Table
Entry of system events in the log table.
– Syslog
Entry of system events in the Syslog file.
• Severity
Select the required Severity. The following settings are possible:
– Info
The messages of all Severity are sent or logged.
– Warning
The message of this Severity and the "Critical" level are sent or logged.
– Critical
Only the messages of this Severity are sent or logged.
4.4.7 SMTP client
4.4.7.1 General
Network monitoring with e-mails
If events occur, the device can automatically send an e-mail, e.g. to the service
technician. The e-mail contains the identification of the sending device, a description of
the cause in plain text, and a time stamp. This allows centralized network monitoring to
be set up for networks with few nodes based on an e-mail system.

Siemens SIMATIC NET SCALANCE SC632-2C Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC632-2C
Category	Switch
Language	English

Summary

Introduction

Security recommendations

Description

Function

Details the configuration and security functions of the device.

Technical basics

IP address

Explains the structure of IPv4 addresses, subnet masks, and CIDR notation.

Configuring with Web Based Management

Web Based Management

Describes the Web Based Management (WBM) interface and its requirements.

Starting and logging in

Provides steps for establishing a connection and logging into the WBM.

"System" menu

DHCP Server

Details the configuration of the device as a DHCP server.

Passwords

"Layer 2" menu

Configuration

Enables basic configuration for Layer 2 functions like MAC aging and redundancy.

"Layer 3" menu

NAT

Covers NAT general settings, masquerading, NAPT, source NAT, and NETMAP.

VRRPv3

Details VRRPv3 configuration for router redundancy and interface tracking.

"Security" menu

Users

Covers user account management, roles, and groups for security settings.

Passwords

Allows configuration and management of user passwords and password policies.

Firewall

IPsec VPN (SC64x-2C)

Details the configuration of IPsec VPN connections, phase 1 and phase 2 settings.

Upkeep and maintenance

Device configuration with PRESET-PLUG

Explains how to configure devices using the PRESET-PLUG.

Restoring the factory settings

Exchange of configuration data with STEP7

Exchange of configuration data with STEP 7 Basic/Professional using a file