Configuring with Web Based Management
4.6 "Layer 3" menu
SCALANCE SC-600 Web Based Management (WBM)
262 Configuration Manual, 10/2021, C79000-G8976-C475-03
4.6.1.2 Configuration
On this page, you configure the subnet for the interface.
Description
The page contains the following:
• Interface (Name)
Select the interface from the drop-down list.
• Status
Enable or disable the interface.
• Interface Name
Enter the name of the interface.
• MAC Address
Displays the MAC address of the selected interface.
• DHCP
Enable or disable the DHCP client for this IPv4 interface.
Note
If you want to operate the device as a router with several interfaces, disable DHCP on
all interfaces.
• IP Address
Enter the IPv4 address of the interface. The IPv4 addresses must not be used more
than once.
• Subnet Mask
Enter the subnet mask of the subnet you are creating. Subnets on different interfaces
must not overlap.
To Next Page
Loading...
