Configuring with Web Based Management
4.5 "Layer 2" menu
SCALANCE SC-600 Web Based Management (WBM)
254 Configuration Manual, 10/2021, C79000-G8976-C475-03
Description of the displayed boxes
The page contains the following boxes:
• VLAN ID
If you click on this text box, a drop-down list is displayed. Here you can select the
VLAN ID of a new MAC address you want to configure.
• MAC address
Here you enter a new MAC multicast address you want to configure.
The table has the following columns:
• Select
Select the row you want to delete.
• MAC address
Here, the multicast address is displayed that the device has learned or the user has
configured.
• Status - Static
Shows the status of each address entry. The address was entered statically by the
user. Static addresses are stored permanently; in other words, they are not deleted
when the Aging-Time expires or when the device is restarted. These must be deleted
by the user.
Configuration procedure
Creating a new entry
1. Select the required VLAN ID from the ""drop-down list.
2. Enter the MAC address in the "MAC address" input box.
3. Click the "Create" button. A new entry is generated in the table.
4. Assign the relevant ports to the MAC address.
5. Click the "Set Values" button.
To Next Page
Loading...
