Siemens SIMATIC NET SCALANCE SC632-2C User Manual

Configuring with Web Based Management
4.6 "Layer 3" menu
SCALANCE SC-600 Web Based Management (WBM)
260 Configuration Manual, 10/2021, C79000-G8976-C475-03
• Address Type
Shows the address type. The following values are possible:
– Primary
The first IPv4 address that was configured on an IPv4 interface.
– Secondary
All other IPv4 addresses that were configured on the IPv4 interface.

Siemens SIMATIC NET SCALANCE SC632-2C Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC632-2C
Category	Switch
Language	English

Summary

Introduction

Security recommendations

Description

Function

Details the configuration and security functions of the device.

Technical basics

IP address

Explains the structure of IPv4 addresses, subnet masks, and CIDR notation.

Configuring with Web Based Management

Web Based Management

Describes the Web Based Management (WBM) interface and its requirements.

Starting and logging in

Provides steps for establishing a connection and logging into the WBM.

"System" menu

DHCP Server

Details the configuration of the device as a DHCP server.

Passwords

"Layer 2" menu

Configuration

Enables basic configuration for Layer 2 functions like MAC aging and redundancy.

"Layer 3" menu

NAT

Covers NAT general settings, masquerading, NAPT, source NAT, and NETMAP.

VRRPv3

Details VRRPv3 configuration for router redundancy and interface tracking.

"Security" menu

Users

Covers user account management, roles, and groups for security settings.

Passwords

Allows configuration and management of user passwords and password policies.

Firewall

IPsec VPN (SC64x-2C)

Details the configuration of IPsec VPN connections, phase 1 and phase 2 settings.

Upkeep and maintenance

Device configuration with PRESET-PLUG

Explains how to configure devices using the PRESET-PLUG.

Restoring the factory settings

Exchange of configuration data with STEP7

Exchange of configuration data with STEP 7 Basic/Professional using a file