Commissioning and Configuration
Process Control System PCS 7 - PCS 7 BOX
4-6 A5E00272813-01
4. In the next dialog, leave the default settings and activate the "PCS 7 OS"
option box. This activates the "single station system" option as a default
setting. Leave this setting and click on the "Next" button.
5. In the next dialog, assign a folder name and path for your PCS 7 project.
6. Click on the button "Finish", to create the PCS7 project using the information
and settings you have made.
7. Leave the default setting for "Assign unique message numbers CPU-wide" in
the displayed "Selection of Message Number Assignment" dialog and click
"OK".
Additional Information
Adding a SIMATIC PCS 7 BOX station to your PCS 7 project
STEP 7 online help for the PCS 7 Wizard
To Next Page
Loading...
