Siemens SIMATIC PCS 7 BOX User Manual

Additional Commissioning and Configuration
Process Control System PCS 7 - PCS 7 BOX
5-8 A5E00272813-01
7. In HW Config, navigate to the CP 5611 in the hardware catalog under
SIMATIC PC Station > CP PROFIBUS.
Press the left mouse button and drag the marked components under CP 5611
to the slot in the station window that you selected in the Component
Configurator on the ES. Click on the "OK" button in the displayed dialog.
8. In HW Config, navigate to the WinCC application in the hardware catalog
under SIMATIC PC Station > HMI.
Press the left mouse button and drag the marked WinCC application to the slot
in the station window that you selected in the Component Configurator on the
ES. Click on the "OK" button in the displayed dialog.
9. Save and compile your changes and close HW Config.
Additional Information
STEP 7 online help

Siemens SIMATIC PCS 7 BOX Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 BOX
Category	Industrial PC
Language	English