Transponder
7.6 SIMATIC RF610T
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
369
7.6 SIMATIC RF610T
7.6.1 Features
The SIMATIC RF610T is passive and maintenance-free. It operates based on the
UHF Class 1 Gen 2 technology and is used for saving the electronic product code (EPC) of
96 bits / 240 bits. The label also has a 512 bit user memory.
The SIMATIC RF610T offers a host of possible uses for a wide range of applications and
supports efficient logistics throughout the entire process chain.
Thanks to its antenna geometry, the transponder can be read from any direction. However,
the range is reduced if it is not aligned in parallel with the antenna.
Area of application
• Simple identification, such as barcode re-
placement or barcode supplement
• Warehouse and distribution logistics
• Product identification
For the Food & Beverage sector, a special ver-
sion can be supplied on request that is certified
for use in contact with food.
Air interface According to ISO 18000-63
Memory
• EPC: 96 ... 240 bits
• User memory: 64 bytes
Read range Max. 5 m
1)
Mounting
• Suspended by means of cable ties, or simi-
lar
• Can also be fixed with screws or glued by
customer.
• Not suitable for mounting straight onto met-
al.
1)
Depending on the environment, the reader/the antennas and the set power
7.6.2 Ordering data
Table 7- 19 Ordering data RF610T
To Next Page
Loading...
