Siemens Simatic S7-1500 / ET 200MP - Page 165

Wiring
7.5 Wiring rules
Automation system
164 System Manual, 01/2023, A5E03461182-AK
Wiring rules for ... 40-pin front con-
nector
(screw terminal,
for 35 mm module)
40-pin front con-
nector
(push-in terminal,
for 35 mm module)
40-pin front con-
nector
(push-in terminal,
for 25 mm module)
Max. actuating force for complete opening of the
push-in terminal
-
40 N
40 N
Recommended crimp shape for end sleeve - Corresponding to
crimping tool PZ 6/5
Corresponding to
crimping tool PZ 6/5
* American Wire Gauge
** End sleeve
Note
40
-pin front connector (screw terminal, for 35 mm modules), article number 6ES7592-
1AM00
-0XB0
In case of a total current of more than 8
A, apply the supply voltage 24 V DC (terminals 19
and 39) and the ground (terminals 20 and 40) twice.