Siemens Simatic S7-1500 / ET 200MP - Configuration of the Distributed I;O System SIMATIC et 200 MP

System overview
4.2 Configuration
Automation system
44 System Manual, 01/2023, A5E03461182-AK
4.2.2 Configuration of the distributed I/O system SIMATIC ET 200MP
Configuration
The SIMATIC ET 200MP distributed I/O system is made up of the following components:
• Interface module (PROFINET or PROFIBUS)
• Digital and analog I/O modules
• Communications modules (point-to-point)
• Technology modules (counting, position detection, time-based IO)
• System power supply (optional)
The ET 200MP distributed I/O system is installed on a mounting rail like the S7-1500
automation system.
The I/O modules of the SIMATIC ET 200MP distributed I/O system can be used in a
decentralized configuration (with an ET 200MP interface module) or in a centralized
configuration (with an S7-1500 CPU).
Example of a configuration with the IM 155-5 PN ST interface module
①
Interface module
②
I/O modules
③
System power supply
④
Mounting rail with integrated DIN rail profile
Figure 4-10 Example of a configuration of the ET 200MP with IM 155-5 PN ST