Siemens Simatic S7-1500 / ET 200MP - Data Record 100 Validation Error Codes

System overview
4.5 Interface modules for SIMATIC S7-1500 I/O devices
Automation system
System Manual, 01/2023, A5E03461182-AK
67
Additional information
You can find a detailed description of the "Trace" function in the Function Manual
SIMATIC/SINAMICS Using the trace and logic analyzer function SIMATIC/SINAMICS Trace and
logic analyzer function (https://support.industry.siemens.com/cs/ww/en/view/64897128).
4.5 Interface modules for SIMATIC S7-1500 I/O devices
An interface module connects the SIMATIC S7-1500 I/O devices as ET 200MP distributed I/O
system via PROFINET or PROFIBUS with the controller. The interface module exchanges the
data between the higher-level controller and the I/O modules.
Interface modules
Short designation IM 155-5 PN HF
IM 155-5 PN ST
IM 155-5 PN BA IM 155-5 DP ST
Article number
High Feature (HF)
6ES7155-5AA00-0AC0
---
---
Standard (ST)
6ES7155-5AA01-0AB0
---
6ES7155-5BA00-0AB0
Basic (BA)
---
6ES7155-5AA00-0AA0
---
Manual
High Feature (HF)
Link
---
---
Standard (ST)
Link
---
Link
Basic (BA)
---
Link
---
Supply voltage
24 V DC
24 V DC
24 V DC
Number of IO modules
30
12
12
Interfaces 1 x PROFINET IO; integrated 2-
port switch
1 x PROFINET IO; integrated
2-port switch
1 x PROFIBUS
Min. slave interval
---
---
100 μs
Isochronous real-time commu-
nication (IRT)
X
---
---
Isochronous mode
X (shortest cycle 250 µs)
---
---
Prioritized startup
X
---
---
Device replacement without
programming device
X (LLDP; address assignment
by a tool, for example, STEP 7)
X (LLDP; address assignment
by a tool, for example, STEP
7)
---
Shared device
High Feature: 4 IO controllers
Default: 2 IO controllers
2 IO controllers
---
Identification and mainte-
nance data
I&M 0 to 3
I&M 0 to 3
I&M 0 to 3
Media redundancy (MRP)
X
X
---
Media redundancy with
planned duplication (MRPD)
High Feature: X
Default:
--- ---
System redundancy on S7-
400H
High Feature: With GSD file
and STEP 7 V5.5 SP3 or higher
Default:
---
---