Flexible automation concepts
11.2 Configuration control (option handling)
Automation system
248 System Manual, 01/2023, A5E03461182-AK
Station option 1 with module that is not present
The module that is located in slot 3 in the station master is not present in the station option
1. Slot 3 must be designated in the control data record accordingly with 255 (= not present).
Module is not present in the station option 1.
Figure 11-6 Example: Hardware configuration of station option 1 with the associated control data
record in STEP 7
To Next Page
Loading...
