Commissioning
12.3 Procedure for commissioning the S7-1500 automation system
Automation system
System Manual, 01/2023, A5E03461182-AK
259
Inserting the SIMATIC memory card
To insert a SIMATIC memory card, follow these steps:
1. Open the front cover of the CPU.
2. Ensure that the CPU is either switched off, or in the STOP mode.
3. Insert the SIMATIC memory card, as depicted on the CPU, into the slot for the SIMATIC
memory card.
① Standard, F-CPUs / compact CPUs from article number 6ES751x-xxx02-0AB0/6ES751x-
1CK01-0AB0: The slot for the SIMATIC memory card is located on the bottom of the CPU.
Figure 12-1 Slot for the SIMATIC memory card
4. Insert the SIMATIC memory card with light pressure into the CPU, until the SIMATIC memory
card latches.
To Next Page
Loading...
