New properties/functions
Automation system
System Manual, 01/2023, A5E03461182-AK
27
What's new? What are the customer benefits? Where can I find the infor-
Extension of the CPU portfolio with the CPU
1518TF-4 PN/DP:
CPU 1518TF-4 PN/DP offers a very large pro-
gram and data memory for demanding usage
in applications that contain central I/O in
addition to distributed automation structures.
The CPU can also be used for Safety functions
according to IEC 61508 up to SIL 3 and ISO
13849 up to PLe for safety applications.
CPU 1518TF-4 PN/DP features high-
performance, extended motion control func-
tions, for example:
• Synchronous operation functions
• Kinematics functions
Important technical specifications:
• Code work memory: 9 MB
• Data work memory: 60 MB
• Motion control resources: 15360
• Extended Motion Control resources: 512
Starting from section System
overview (Page 32)
New Motion Control tech-
nology functions for the
following tasks:
• Desynchronization of
gearing or camming
• Following value shift in
gearing or camming
• Simulation of the kine-
matic motions
• Copying the calculated
cam elements
Extended areas of application Section Motion Control
(Page 86)
Changed
contents
With the introduction of
DHCP (Dynamic Host Config-
uration Protocol), NTP servers
can also be obtained via
DHCP. This changes the con-
figuration, in order to define
where the NTP server obtains
its configuration from:
• via the hardware configu-
ration of the CPU
• via DHCP
• via the block T_CONFIG
More assignment options from NTP servers to
the CPU.
Section Time synchronization
(Page 278)
To Next Page
Loading...
