Commissioning
12.9 Identification and maintenance data
Automation system
288 System Manual, 01/2023, A5E03461182-AK
4. Connect the "Get_IM_Data" instruction as follows:
Figure 12-7 Example: Reading out I&M0 data
5. Call the "Get_IM_Data" instruction in the user program.
Result
The "Get_IM_Data" instruction has stored the I&M0 data in the data block.
You can view the I&M0-Daten online in STEP 7, for example, in the data block with the
"Monitor all" button. The CPU in the example is a CPU 1511-1 PN (6ES7511-...) with firmware
version V1.5.
Figure 12-8 Example: I&M0 data of an S7-1500 CPU
To Next Page
Loading...
