Maintenance
14.5 Firmware update
Automation system
318 System Manual, 01/2023, A5E03461182-AK
Procedure: via the integrated Web server
The procedure is described in the Web server
(https://support.automation.siemens.com/WW/view/en/59193560) Function Manual.
Procedure: online via the SIMATIC Automation Tool
The procedure is described in the SIMATIC Automation Tool
(https://support.industry.siemens.com/cs/ww/en/view/98161300) manual (included in the
SIMATIC Automation Tool).
Special feature at a firmware update of analog modules
When you carry out a firmware update for analog modules, you have to supply 24 V DC load
supply to the module through the infeed element.
Behavior after the firmware update
After the firmware update, check the firmware version of the updated module.
Reference
For more information on the topic of firmware update, refer to the STEP 7 online help and the
following FAQ on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/89257657).
To Next Page
Loading...
