Siemens Simatic S7-1500 / ET 200MP - Page 99

System overview
4.9 Power supply
Automation system
98 System Manual, 01/2023, A5E03461182-AK
System power supply modules
System power supplies supply the internal electronics of the S7-1500 modules with power via
the backplane bus. The table below shows the available system power supply modules:
Short designation PS 25 W 24 V DC PS 60 W 24/48/60 V DC PS 60 W
24/48/60 V DC HF
PS 60 W 120/230 V AC/D
C
Article number
6ES7505-0KA00-0AB0
6ES7505-0RA00-0AB0
6ES7505-0RB00-
0AB0
6ES7507-0RA00-0AB0
Manual
Link
Link
Link
Link
Rated input volt-
age
24 V DC 24 VDC, 48 VDC, 60 VDC 24 VDC, 48 VDC,
60 VDC
120 V AC, 230 V AC
120 V DC, 230 V DC
Output power
25 W
60 W
60 W
60 W
Electrical isolation
from the back-
plane bus
X
X
X
X
Diagnostic inter-
rupt
X
X
X
X
Energy buffering
for data backup in
the CPU
---
---
Up to 20 MB reten-
tive
---
Load power supply modules
The load power supply modules with automatic range selection of the input voltage are
optimally adapted in design and functionality to the SIMATIC S7-1500 controller. The table
below shows the available load power supply modules:
Short designation
PM 70 W 120/230 V AC
PM 190 W 120/230 V AC
Article number
6EP1332-4BA00
6EP1333-4BA00
Manual
Link
Link
Rated input voltage
120/230 V AC,
with automatic switchover
120/230 V AC
with automatic switchover
Output voltage
24 V DC
24 V DC
Rated output current
3 A
8 A
Power consumption
84 W
213 W