Siemens SIMATIC S7 - Page 31

Tool operations
3.2 Scan a network and use the device table
SIMATIC Automation Tool V2.1 user guide
Manual, V2.1.1 07/2016, A5E33042676-AC
31
Event log
The event log area is below the device table. When you select devices and start an
operation, information about successful and unsuccessful results is displayed in the event
log. The event log column headers have a right-click menu to show/hide columns.
Use a right-click in the Event log to open the menu shown below.
Copy log items to the clipboard
Save log items to a file
Clear all log items