EPROM/EEPROM OPERA
TION
4-13
Hardware
and Installation User Manual
You
can edit an RLL program in an EEPROM by following the steps listed below
.
Refer
to the user
’
s manual for your programming unit for detailed instructions
about
the execution of AUX Functions.
1.
Execute the AUX Function 84 option that copies EEPROM to RAM.
2.
Select RAM as the program source.
3. Make
changes in your program with a programming unit by editing the
source
code in RAM memory
.
4.
Execute the AUX Function 84 option that copies RAM to EEPROM.
5.
Select the EEPROM as the program source.
Although the TI525/TI535 can copy a program from either an EPROM or an
EEPROM into RAM, the TI525/TI535 cannot copy a program from RAM to an
EPROM.
NOTE
AUX Function 84 affects only the RLL program and the I/O
configuration. Timer/counter and drum/event drum variables
and values in V memory are not affected by AUX Function 84
operations.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.comArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
