STAR
TUP / TROUBLESHOOTING
5-16
Hardware
and Installation User Manual
6. If
the PC
GOOD LED does not turn on at this time, your PLC may have
a hardware failure. Contact your Siemens Industrial Automation
distributor
or sales
office. If you need assistance in contacting your U.S.
sales office, call 1–800–964–4114. Have the following information
available
before you call:
List of fatal and non-fatal errors
PLC serial number
PLC software revision (execute AUX Function 15 or check the PLC
label)
Sequence of events leading up to the failure
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.comArtisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
