Introduction
1.1 Important notes
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
11
Operating instructions and other manuals
● Please read the operating instructions of the respective components (Operating
instructions (https://support.industry.siemens.com/cs/ww/en/ps/16027/man
))
● In addition to the "SIMOCODE pro" manual collection, the following manuals are available
to you:
– The manual "SIMOCODE pro Safety fail-safe digital modules"
(https://support.automation.siemens.com/WW/view/en/50564852
)
– The appropriate manual for the DP master
– The system manual "SIMATIC PROFINET System Description"
(https://support.automation.siemens.com/WW/view/en/19292127
)
– The manual "Fault-tolerant S7-400H systems"
(https://support.automation.siemens.com/WW/view/en/1186523
)
– Programming manual "PROFINET IO - from PROFIBUS DP to PROFINET IO"
(https://support.automation.siemens.com/WW/view/en/19289930
)
– The application description "Saving Energy with SIMATIC S7 and ET200 S"
(https://support.automation.siemens.com/WW/view/en/41986454
)
More information
You will find further information on the Internet:
● SIMOCODE pro (https://www.siemens.com/simocode
)
● Information and Download Center (https://www.siemens.com/sirius/infomaterial)
● Siemens Industry Online Support (SIOS)
(https://support.industry.siemens.com/cs/ww/en/ps
)
● Certificates (https://support.industry.siemens.com/cs/ww/en/ps/16027/cert).
Disclaimer of liability
The products described here have been developed to perform safety-related functions as
part of a complete plant or machine. In general, a complete safety system consists of
sensors, evaluation units, signaling devices and methods for safe tripping. The manufacturer
is responsible for ensuring safe functioning of the complete plant or machine. Siemens AG,
its subsidiaries, and associated companies (hereinafter referred to as "Siemens") are not in a
position to guarantee every characteristic of a complete plant or machine not designed by
Siemens.
Siemens also denies all responsibility for any recommendations that are made or implied in
the following description. No new guarantee, warranty, or liability claims above those
standard to Siemens can be derived from the following description.
Recycling and disposal
For environmentally friendly recycling and disposal of your old device, please contact a
company certified for the disposal of electronic waste and dispose of the device in
accordance with the regulations in your country.
To Next Page
Loading...
