Siemens SIMOCODE pro C - Identification of the Motor Feeder and the SIMOCODE Pro Components

Description of system components
8.3 Operator panel with display
SIMOCODE pro
132 System Manual, 05/2019, A5E40507475002A/RS-AD/004
8.3.3.17 Identification of the motor feeder and the SIMOCODE pro components
In the "Identification" menu item, you will find detailed information about the used
SIMOCODE pro hardware components, e.g. hardware and firmware versions. This dialog
box also enables identification of the motor feeder via a plant identifier stored in
SIMOCODE pro, as well as a request for the location designation and display of the device's
internal comment.
The essential menus are described by way of an example below:
Identification
● Plant identifier
● Location designation
● Date installed
● Description
Basic unit
● Order number
● Short code
● Vendor
● Device subfamily
● Device class
● System
● Ident. no.
● Hardware version
● Firmware version
● Time stamp
Display
● Order number
● Hardware version
● Firmware version