Siemens SIMOCODE pro C - Technical data; 15.1 Common technical data

SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
329
Technical data
15
15.1 Common technical data
Common technical data
Standards
EN 60204-1, EN 1760-1, ISO 13849-1, IEC 61508,
IEC/EN 60947-4-1, IEC/EN 60947-5-1, ISO EN 80079-36, ISO EN 80079-37
Test verification documents
See Certificates
(https://support.industry.siemens.com/cs/ww/en/ps/16027/cert
)
Permiss. ambient temperature
In operation
-25 to +60°C
1)
For storage and transport
-40 to +80°C
2)
at installation altitude above MSL
≤ 2000 m
≤ 3000 m
Max. +50 °C (no protective separation)
≤ 4000 m
Max. +40 °C (no protective separation)
Degree of protection (according to IEC 60529)
All components (except current measuring
modules with bus connection, operator
panel and door adapter)
IP20
Current measuring modules with bus
connection
IP00
Operator panel (front) and door adapter
(front) with cover
IP54
Vibration resistance acc. to IEC 60068-2-6
• General
• SIMOCODE pro S basic unit and
SIMOCODE pro S multifunction
module assembled on a current
measuring module
• SIMOCODE pro V basic unit
assembled on a current / voltage
measuring module
• 1-6 Hz / 15 mm; 6-500 Hz / 2 g
• 1-6 Hz / 15 mm; 6-500 Hz / 1 g
• 1-6 Hz / 15 mm; 6-500 Hz / 1 g