Commissioning
8-115
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
8.3 Switching on for the first time
Requirement
Your system with the C230-2 is installed and wired.
The mode selector must be set to STOP!
Switching on for the first time
Switch on the power supply module.
S The 24 VDC LED on the power supply module is illuminated.
S On the C230-2:
– The 5 VDC LED illuminates.
– All other LEDs light up briefly (approx. 2 seconds).
To Next Page
Loading...
