Device Data
3-30
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
3.1.5 I/O modules approved for SIMOTION
Preferred peripherals for use with SIMOTION C:
S Centralized peripherals:
SIMATIC S7-300 I/O modules (only with SIMOTION C)
S Distributed I/O systems:
– SIMATIC ET 200M (distributed use of SIMATIC S7-300 I/O modules):
The modular I/O system for control cabinet installation and high channel
densities
– SIMATIC ET 200S:
Fine modular I/O system for control cabinet installation including motor start-
ers, safety technology and individual grouping of the load groups
– SIMATIC ET 200X:
The modular I/O system in the IP 65/67 degree of protection for use without
a control cabinet and in the machine’s proximity; includes motor starters and
pneumatic modules as well as DESINA- and ECOFAST-conform modules
– SIMATIC ET 200eco:
The compact, economical I/O system in the IP 67 degree of protection for
use without a control cabinet and in the machine’s proximity; with the flexible
and fast ECOFAST or M12 connection system
S Other PROFIBUS DP I/Os:
ADI 4 (Analog Drive Interface)
for connecting drives with a ± 10 V analog setpoint interface
Note
Please note that not all modules of the above-mentioned I/Os or I/O systems are
approved for SIMOTION. Additionally, system-related functional differences as
regards use with SIMOTION and SIMATIC may occur. For example, special pro-
cess-control functions (e.g. insertion and removal under voltage...) are not sup-
ported by SIMOTION for the ET 200M distributed I/O system.
A detailed, regularly updated list of the I/O modules approved for use with SIMO-
TION, as well as notes on their use, can be found on the Internet at:
http://www4.ad.siemens.de/view/cs/en/10805436
...Motion Control System SIMOTION
Supplementary system components
FAQ (entry ID: 11886029)
To Next Page
Loading...
Need help?
General
