Siemens SIMOTION D410-2 DP User Manual

8. The communication for the control of the SINAMICS drive is configured in the following
dialog
box. It is recommended that these settings be made automatically by the engineering
system.
Figure 7-9 Configuring the process data exchange (standard)
You
can also make the settings manually for the process data exchange by selecting "User-
defined".
Commissioning (software)
7.2 Performing an offline configuration
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015 155

Siemens SIMOTION D410-2 DP Specifications

General

Brand	Siemens
Model	SIMOTION D410-2 DP
Category	Controller
Language	English