Siemens SIMOTION Series User Manual

9.3.4.1 Start SIMOTION P
The following settings are possible:
● Enabled
Immediately cancels the lock set with Disabled. The SIMOTION P320‑4 must be booted to
automatically start SIMOTION P.
SIMOTION P can also be started by means of the SIMOTION P State application using the
Start SIMOTION P button.
● Disabled
Prevents the automatic starting of SIMOTION P while the Windows system is booting up.
SIMOTION P cannot be started until this lock is canceled.
Figure 9-3 Start SIMOTION P - Disabled
Parameter assignment/addressing
9.3 SIMOTION P control manager
SIMOTION P320-4 E / P320-4 S
Commissioning and Hardware Installation Manual, 11/2016 131

Siemens SIMOTION Series Specifications

General

Interfaces	PROFIBUS, PROFINET, Ethernet, USB
Programming Languages	LAD, FBD
Safety	Integrated safety functions
Typical Applications	Machine automation, robotics, packaging, printing
Relative Humidity	5% to 95% (non-condensing)
Protection Class	IP20
Certifications	CE, UL, cUL