Ethernet interface for Windows
The IP address of the Ethernet interface for Windows can only be modified via the Windows
Control Panel > Network and Sharing Center.
Figure 9-12 Windows Control Panel-Network and Sharing Center
Note
Windows Firewall
To allow the Windows IP to be accessed externally, this must be set as an exception in the
Windows firewall File and Printer Sharing. Otherwise, there is only limited access to Windows
from outside.
Parameter assignment/addressing
9.5 Ethernet communication
SIMOTION P320-4 E / P320-4 S
142 Commissioning and Hardware Installation Manual, 11/2016
To Next Page
Loading...
