Siemens SIMOTION Series User Manual

Distributed I/O systems (PROFINET)
Table 3-1 Components for distributed I/O
Component Function
SIMATIC ET 200M Modular I/O system for cabinet installation and high channel densities.
SIMATIC ET 200S Finely modular I/O system for cabinet installation including motor starters,
safety technology, and individual grouping of the load groups.
SIMATIC ET 200SP Finely scalable I/O system for cabinet installation; SIMATIC ET 200SP fea‐
tures a single-cable and multi-cable connection with push-in terminals, com‐
pact dimensions, high performance, and low part variety.
SIMATIC ET 200MP Modular I/O system for cabinet installation and high channel densities in the
SIMATIC S7‑1500 packaging system.
SIMATIC ET 200MP permits the shortest bus cycle times and fastest re‐
sponse time even with large volumes of data.
SIMATIC ET 200eco I/O system with IP67 degree of protection for machine-related, cabinet-free
applications, featuring a flexible and fast connection system in ECOFAST or
M12.
SIMATIC ET 200pro Modular I/O system with IP65/67 degree of protection for machine-related,
cabinet-free applications, including motor starters.
Note
Note that not all modules of the above-mentioned I/Os or I/O systems have been released for
SIMOTION.
There may also be system-dependent functional differences with regard to the use on
SIMOTION and on SIMATIC.
For example, special process-control functions (e.g. HART modules, etc.) are not supported
by SIMOTION for the ET 200M distributed I/O system.
For a detailed and routinely updated list of I/O modules enabled with SIMOTION as well as
application information, visit us online at:
SIEMENS Industry Online Support - Product support - Supplementary system components
(https://support.industry.siemens.com/cs/de/en/view/11886029)
Further modules are integrated via the GSD file of the device's manufacturer.
Note
Note that in individual cases, additional supplementary conditions must be fulfilled.
Drive systems (via PROFINET IO)
Table 3-2 List of typically connected drive systems
Component Function
SINAMICS S120 Servo drives, innovative single-axis and multi-axis solution
Description
3.2 SIMOTION P320-4 product description
SIMOTION P320-4 E / P320-4 S
58 Commissioning and Hardware Installation Manual, 11/2016

Siemens SIMOTION Series Specifications

General

Interfaces	PROFIBUS, PROFINET, Ethernet, USB
Programming Languages	LAD, FBD
Safety	Integrated safety functions
Typical Applications	Machine automation, robotics, packaging, printing
Relative Humidity	5% to 95% (non-condensing)
Protection Class	IP20
Certifications	CE, UL, cUL