Siemens SINAMICS G120 - Dimension Drawings, Drilling Dimensions for the PM230 Power Module, IP55

4.3.2 Dimension drawings, drilling dimensions for the PM230 Power Module, IP55
The following dimension drawings are not to scale.
Frame sizes FSA ... FSC
+HLJKW
:LGWK
'HSWK
E
KF
Figure 4-5 Dimension drawing, PM230 Power Module IP55, FSA … FSC
Table 4-1 Dimensions
Frame size Width
[mm]
Height
[mm]
Depth [mm]
Without operator
panel
With BOP‑2, IOP‑2 operator panel
or blanking cover
FSA 154 460 249 256
FSB 180 540 249 256
FSC 230 620 249 256
Table 4-2 Drilling dimensions, cooling clearances and fixing
Frame size Drilling dimensions [mm] Cooling air clearances [mm] Screws/torque
[Nm]
b h c Top Bottom Lateral
FSA 132 445 11 100 100 0
1)
4 x M4 / 2.5
FSB 158 524 11 100 100 0
1)
4 x M4 / 2.5
FSC 208 604 11 125 125 0
1)
4 x M5 / 3.0
1)
You can mount the Power Modules without any lateral cooling air clearance. For tolerance reasons,
we recommend a lateral clearance of approx. 1 mm.
Installing
4.3 Installing Power Modules
Converter with the CU230P-2 Control Units
66 Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE