In addition, for frame sizes FSD and FSE, release the two terminal screws on the connections
for the motor and remove the dummy plug.
For frame size FSF you must breakout the openings from the connection cover for the power
connections. Use side cutters or a fine saw blade.
/LQHVXSSO\
0RWRU
/LQHVXSSO\
0RWRU
/
/
/
/
/
/
8
9
:
8
9
:
)6')6(
)6)
Figure 4-22 Line and motor connections
You must re-attach the connection covers in order to re-establish the touch protection of the
inverter after it has been connected up.
Installing
4.4 Connecting the line supply and motor
Converter with the CU230P-2 Control Units
98 Operating Instructions, 09/2017, FW V4.7 SP9, A5E34257946B AE
To Next Page
Loading...
