Siemens SINAMICS S120 Series - Page 197

Communication via Ethernet/IP (EIP)
7.6 Supported objects
Communication
Function Manual, 12/2018, 6SL3097-5BD00-0BP0
195
TCP/IP Interface Object, Instance Number: F5 hex
Supported services
Class
•
Get Attribute all
•
Get Attribute single
Instance
•
Get Attribute all
•
Get Attribute single
•
Set Attribute single
Table 7- 14 Class Attribute
No.
Service
Type
Name
1
get
UINT16
Revision
2
get
UINT16
Max Instance
3
get
UINT16
Num of Instances
Table 7- 15 Instance Attribute
No.
Service
Type
Name
Value/explanation
1 get UNIT32 Status Fixed value: 1 hex
1: Configuration acknowledged, by DHCP or saved
values
2 get UNIT32 Configuration
Capability
Fixed value: 94 hex
4 hex: DHCP supported,
10 hex: Configuration can be adjusted,
80 hex: ACD-capable
3 get, set UNIT32 Configuration
Control
1 hex: Saved values
3 hex: DHCP
4 get UNIT16 Physical Link Path Size (in WORDs)
Fixed value: 2 hex
UNIT8 Path
20 hex,
F6 hex,
24 hex,
05 hex, where 5 hex is the number of instances of
F6 hex (four physical ports plus one internal port).
5 get, set
STRING
Interface Config-
uration
r61000 Name of Station
UNIT32
r61001 IP address
6 get, set
UNIT16
Host Name
Host Name Length
STRING
-
10 get, set UNIT8 Select ACD local OM flash:
0: Disabled,
1: Enabled
11 get, set
UNIT8
Last Conflict
Detected
local OM flash ACD Activity
UNIT8
local OM flash Remote MAC
UNIT8
local OM flash ARP PDU