Commissioning
5.5 Establishing an online connection to the drive unit
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
103
Quick search via "Online access"
In order to obtain a fast overview, you can start a search in "Online access" at the required
interface. If the wiring to your drive is error-free and you have wired the correct drive (LED
flashing for checking), the drive is displayed with the appropriate IP address.
Figure 5-32 Online access
1. Select the drive unit with which you want to go online in the project navigation (or in the
device view).
2. Click the
button.
The "Go online" dialog opens.
Figure 5-33 Go online
3. If a correctly configured interface has still not been set, then select "Type of the PG/PC
interface" in the drop-down list.
To Next Page
Loading...
