Siemens SINAMICS S120 - Supported Browsers

Performing basic parameterization
6.1 Control Unit
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
117
NOTICE
Using non-encrypted connections (HTTP)
When using the HTTP protocol, the login data is also sent unencrypted. Using the HTTP
protocol facilitates, among other things, hacking attacks and stolen passwords – and can
result in data manipulation by unauthorized persons.
• Limit access to secure HTTPS connections so that all data is transferred encrypted.
The configuration option provided to limit connections to just HTTPS can only be changed
when the web server is active:
● In the Startdrive configuration dialog
● In the web server prior to commissioning for the first time
● Using parameter p8986
Note
Access to the web server via PROFINET interface X150
In the parameter view, you can configure HTTP or HTTPS access to the web server via a
PROFINET interface using parameters p8986.1, p8984 and p8985. To do this, you must
activate access to the web server with p8986.0
= 1 or via the screen form "Web Server".
Procedure:
1. In the configuration dialog, activate option "Only permit access via https".
6.1.1.2
Supported browsers
You can display the content of the web server either on a PC/laptop screen, a tablet PC or a
smart phone. The web server integrated in SINAMICS S120 converters supports the
following browsers:
Commissioning device
Operating system
Supported browsers
PC Windows (from Version 7)
• Microsoft Internet Explorer (Version 11)
• Microsoft Edge (Version 14)
• Mozilla Firefox (Version 62)
• Google Chrome (Version 69)
Note:
We recommend the use of Windows 10,
version 1803, dated April 2018 or later.
Note:
We recommend the use of Google Chrome
in the supported version 69.
Tablet / smartphone Apple iOS (from Version 12.0)
• Google Chrome (Version 69)
• Safari (Version 12.0)
Android (from Version 4.4.4)
• Google Chrome (Version 69)