Siemens SINAMICS S120 - Project Navigation; User Interface - Parameterization; Modules in the Hardware Catalog

Startdrive commissioning tool
3.2 User interface - parameterization
32 Getting Started, 12/2018, 6SL3097-5AG30-0BP0
3.1.2
Project navigation
Description
The project tree is used to display and edit components and project data.
After they have been inserted, drives are hierarchically displayed as follows in the project
tree:
Figure 3-2 Example: Project tree
The most important information of a project:
● Project name
● Name of the new added drive
● Device configuration of the new added drive
● The created drive objects of a drive (automatic speed control, infeed, drive axis...)
● Trace recording of drive
3.2
User interface - parameterization
3.2.1
Modules in the hardware catalog
As soon as the device configuration is active, a hardware catalog can be displayed/hidden at
the right-hand edge of the program window. The device configuration automatically becomes
active as soon as a drive device was inserted. The required SINAMICS modules can be
transferred from the hardware catalog into a project and specified.