Siemens SINAMICS S120 - Making Detailed Settings

Commissioning
5.4 Creating a project offline in Startdrive
82 Getting Started, 12/2018, 6SL3097-5AG30-0BP0
6. In the Inspector window, select entry "Power Module - Selection - xxx".
Figure 5-17 Power Module specified
All Power Modules for the "High dynamic (servo)" drive object type (default setting for the
1st call) are displayed in the list. If you want to use drive objects of type "VECTOR", you
must change the display of the list.
7. If you are using drive objects, type "Universal (vector)", then select the "Universal
(vector)" option in the "Selected drive object type" drop-down list.
A confirmation prompt appears as to whether you really want to change the drive object
type.
8. Click "Yes" to confirm the prompt.
The list of Power Modules is now refreshed. Now, only Power Modules, type "Universal
(vector)" can be selected. In the same way, the list can be switched back to modules,
type "High dynamic (servo)".
9. Select your Power Module in the list by its article number.
The data of the selected Power Module are assigned to the unspecified Power Module.
The white area turns dark gray.
Result
The Power Module has been inserted and specified.
5.4.4.3
Making detailed settings
Further detail settings can be carried out in the Inspector window for Motor Modules and
Power Modules:
● Motor Module settings / Power Module settings
Allows the modification of the preallocated supply voltage.
Indicates the standard for power settings of the converter and motor.