Siemens SINAMICS S120 - Page 13

Preface
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
11
Notation
The following notation and abbreviations are used in this documentation:
Notation for faults and alarms (examples):
•
F12345
Fault 12345
•
A67890
Alarm 67890
•
C23456
Safety message
Notation for parameters (examples):
•
p0918
Adjustable parameter 918
•
r1024
Display parameter 1024
•
p1070[1]
Adjustable parameter 1070, index 1
•
p2098[1].3
Adjustable parameter 2098, index 1 bit 3
•
p0099[0...3]
Adjustable parameter 99, indices 0 to 3
•
r0945[2](3)
Display parameter 945, index 2 of drive object 3
•
p0795.4
Adjustable parameter 795, bit 4
Purpose of the document
This documentation is aimed at beginners who want to commission a drive system using
Startdrive. The steps described in this document allow a simple SINAMICS S120 drive train
(CU320-2 PN) to be put into operation. It does not claim to be complete, however. The
complete commissioning functions are described in the Commissioning Manual with
Startdrive.
Use of OpenSSL
This product contains software (https://www.openssl.org/) that has been developed by the
OpenSSL project for use in the OpenSSL toolkit.
This product contains cryptographic software (mailto:eay@cryptsoft.com) created by Eric
Young.
This product contains software (mailto:eay@cryptsoft.com) developed by Eric Young.