Commissioning
5.4 Creating a project offline in Startdrive
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
73
You can add an infeed via the hardware catalog.
1. Open the "Line Modules" entry in the hardware catalog.
Active Line Modules, Basic Line Modules and Smart Line Modules can be selected.
2. Select the unspecified infeed in the hardware catalog.
Figure 5-6 Selecting an infeed
3. Drag the unspecified infeed to the device view.
Figure 5-7 Infeed inserted
Generally, the DRIVE-CLiQ connection is automatically established. The unspecified
infeed must now be specified in more detail.
To Next Page
Loading...
