Siemens SINAMICS Series User Manual

Commissioning
8.7 Commissioning optional additional modules
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
325
8.7.1
Terminal Modules (TM31, TM15, TM150)
8.7.1.1
Commissioning with STARTER
Requirement
The project must be consistent with the drive before adding the TMxx. Carry out "Load to the
PG" and then go offline.
An input/output component can only be inserted in the offline state.
Figure 8-36 Inserting input/output components
● Double-click "Insert input/output component".

Siemens SINAMICS Series Specifications

General

Product Line	SINAMICS
Cooling Method	Air-cooled, Liquid-cooled
Voltage Range	200 V to 690 V
Power Range	0.12kW - 250kW
Communication Interfaces	PROFINET, PROFIBUS, Ethernet
Control Modes	Vector control, V/f control
Protection Class	IP20
Type	Variable Frequency Drives (VFD)