Siemens SINAMICS Series User Manual

SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
349
Operation
9
9.1
Basic information
9.1.1
Parameter
Parameter types
The following adjustable and display parameters are available:
● Adjustable parameters (can be written and read)
These parameters have a direct effect on how a function responds.
Example: Ramping time of a ramp-function generator
● Display parameters (can only be read)
These parameters are used to display internal variables.
Example: Actual motor current
Figure 9-1 Parameter types
All these drive parameters can be read via PROFIBUS and changed by means of p
parameters using the mechanisms defined in the PROFIdrive profile.

Siemens SINAMICS Series Specifications

General

Product Line	SINAMICS
Cooling Method	Air-cooled, Liquid-cooled
Voltage Range	200 V to 690 V
Power Range	0.12kW - 250kW
Communication Interfaces	PROFINET, PROFIBUS, Ethernet
Control Modes	Vector control, V/f control
Protection Class	IP20
Type	Variable Frequency Drives (VFD)