Siemens SINAMICS Series User Manual

Descriptions of functions
10.2 Communication, IT security
SINAMICS DCM DC Converter
Operating Instructions, 12/2018, A5E34763375A
405
10.1.4
Analog outputs
See function diagram 2095 in the SINAMICS DCM Parameter Manual
10.2
Communication, IT security
Note
IT security (industrial security)
In order to ensure the safe operation of your systems, you must
take suitable measures,
e.g.
industrial security or network segmentation. You can find more information on Industrial
Security on the Internet at:
IT security (
http://www.industry.siemens.com/topics/global/en/industrial-security)
10.3
Communication according to PROFIdrive
PROFIdrive is the PROFIBUS and PROFINET profile for drive technology with a wide range
of applications in production and process automation systems.
PROFIdrive is independent of the bus system used (PROFIBUS, PROFINET).
Note
PROFINET for drive technology is standardized and described in the following document:
•
PROFIdrive – Profile Drive Technology
PROFIBUS User Organization e. V.
Haid-und-Neu-Straße 7, D-76131 Karlsruhe, Germany
http://www.profibus.com
•
IEC 61800-7
PROFIdrive device classes
Table 10- 3 PROFIdrive device classes
PROFIdrive
PROFIBUS DP
PROFINET IO
Peripheral device (P device)
DP slave (I slaves)
IO Device
Controller (higher-level controller or
host of the automation system)
Class 1 DP master IO Controller
Supervisor (engineering station)
Class 2 DP master
IO Supervisor

Siemens SINAMICS Series Specifications

General

Product Line	SINAMICS
Cooling Method	Air-cooled, Liquid-cooled
Voltage Range	200 V to 690 V
Power Range	0.12kW - 250kW
Communication Interfaces	PROFINET, PROFIBUS, Ethernet
Control Modes	Vector control, V/f control
Protection Class	IP20
Type	Variable Frequency Drives (VFD)