Siemens SINAMICS Series User Manual

Operation
9.3 Controlling via the AOP30 operator panel
SINAMICS DCM DC Converter
380 Operating Instructions, 12/2018, A5E34763375A
9.3
Controlling via the AOP30 operator panel
Note
The OFF switch on the AOP30 operator panel does not have an EMERGENCY OFF
function.
The OFF switch on the AOP30 operator panel does not have an STO function regarding
functional safety.
Note
To operate the AOP30, p2030
= 3 must be set.
An operator panel is located in the cabinet door of the cabinet unit for operating, monitoring,
and commissioning tasks. It has the following features:
● Graphical, backlit LCD for plain-text display and a "bar display" of process variables
● LEDs for displaying the operating states
● Help function describing the causes of and remedies for faults and alarms
● Keypad for controlling a drive under normal operating conditions
● LOCAL/REMOTE switchover for selecting the control terminal (master control assigned to
operator panel or customer terminal block/PROFIBUS)
● Numeric keypad for entering setpoints or parameter values
● Function keys for prompted navigation through the menus
● Two-stage safety concept to protect against accidental or unauthorized changes to
settings
● IP54 degree of protection (when installed)
Figure 9-16 Components of the cabinet unit operator panel (AOP30)

Siemens SINAMICS Series Specifications

General

Product Line	SINAMICS
Cooling Method	Air-cooled, Liquid-cooled
Voltage Range	200 V to 690 V
Power Range	0.12kW - 250kW
Communication Interfaces	PROFINET, PROFIBUS, Ethernet
Control Modes	Vector control, V/f control
Protection Class	IP20
Type	Variable Frequency Drives (VFD)