Descriptions of functions
10.8 Communication via Modbus TCP
SINAMICS DCM DC Converter
542 Operating Instructions, 12/2018, A5E34763375A
ON/OFF text
or Value range
40340 Speed setpoint R RPM 1 -32768 … 32767 r0020
1)
Technology controller enable
Adapt technology controller
1)
40510 Time constant for actual-value filters of
the technology controller
R/W - 100 0.00 … 60.0 p2265
40511 Scaling factor for actual value of the
R/W % 100 0.00 … 500.00 p2269
40512 Proportional amplification of the
R/W - 1000 0.000 … 65.535 p2280
40513 Integral time of the technology
R/W s 1 0 … 60 p2285
40514 Time constant D-component of the
R/W - 1 0 … 60 p2274
Max. limit of technology controller
Min. limit technology controller
40521 Actual value of technology controller
R % 100 -100.0 … 100.0 r2266
Output signal technology controller
The technology controller parameters can only be accessed if, in the STARTER project, also the "Technology controller"
function module is activated.
To Next Page
Loading...
Need help?
General
