Siemens SINUMERIK 828D Series - This Is How You Mount a Motor Module Booksize Compact

4.11.3 This is how you mount a Motor Module Booksize Compact
Installing
Note the tightening torques for hexagonal combination screws or hexagon screws with spring
lock washer and flat washer.
Procedure:
1. Initially tighten the screws by hand with 0.5 Nm.
2. Tighten the screws in the specified sequence 1 to 4 with 6 Nm.
1
2
3
4
5




① Mounting wall
② Screw M6 x 16
③ Plain washer
④ Spring washer
⑤ Nut
Figure 4-44 Motor Module Booksize Compact
Service cases - hardware
4.11 Motor Module Booksize Compact format
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1 169