Siemens SINUMERIK 828D Series User Manual

For the following activities, two additional softkeys are available, which generate pre-
configured logbook entries:
1st Commissioning completed (commissioning at the machine OEM's fa‐
cility)
2nd commissioning completed (commissioning at the company operating
the machine/end user)
Note
Once saved, data can no longer be changed.
3.7.3 This is how you save the machine identity
Saving the machine identity
Note
Ensure that the machine identity that has been entered is correct before saving in order that
no incorrect information is saved.
In order to save the machine identity (address data, version data and logbook) externally on
a data carrier, proceed as follows:
1. Select the "Diagnostics" operating area using the following key:
2. Press the "Version" softkey.
3. Press the "Save" softkey.
The "Save version information: Select Archive" window opens. Select a directory.
Service cases - software
3.7 Machine registration
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1 75

Siemens SINUMERIK 828D Series Specifications

General

Brand	Siemens
Model	SINUMERIK 828D Series
Category	Control Unit
Language	English