Siemens SINUMERIK 828D Series User Manual

3.2.2 This is how you read a setup archive from an external data storage medium
Reading in an archive from an external data carrier
Procedure:
1. Select the "Startup" operating area.
2. Press the menu forward key.
3. Press the "Setup archive" softkey.
4. Press "OK".
The "Startup" window opens.
5. Activate "Read in setup archive".
6. Press "OK".
The "Select Setup archive" window opens and the data tree is displayed.
Service cases - software
3.2 Generating a commissioning archive
Software and hardware
38 Service Manual, 08/2018, 6FC5397-5DP40-6BA1

Siemens SINUMERIK 828D Series Specifications

General

Display	10.4" TFT color display
Operating System	Embedded Linux
Power Supply	24V DC
Protection Class	IP65 (front), IP20 (rear)
Control Unit Type	CNC
Interfaces	Ethernet, USB, RS232
Programming	ShopMill, ShopTurn, G-code